Email us: sales@valvesonlycanada.com
Angle Control Valve
Angle Control Valve applications in Canada, DN25–DN600, Class 150–2500, for pressure reduction, flow control and severe-service applications in process industries.
An Angle Control Valve Manufacturer in Canada, Valves Only Canada supplies angle-pattern globe control valves for applications that require precise throttling together with a 90° change in flow direction. The angled body allows the process line to enter through one port and leave through the adjacent outlet, combining flow regulation and directional change within the same valve.
Inside the valve, the actuator moves the plug relative to the seat to control the available flow area. This regulates flow and pressure through the valve, while specialised cage and trim designs can manage high pressure drops, cavitation, noise and erosion in demanding liquid, gas and steam services.
Features
- Angle-pattern globe body with approximately 90° flow-direction change
- Plug-and-seat throttling mechanism for continuous flow regulation
- Equal-percentage and linear flow characteristics
- Replaceable cage and trim assemblies
- Balanced and unbalanced plug configurations
- Multi-stage anti-cavitation trim for high liquid pressure drops
- Low-noise trim for high-velocity gas and steam services
- Hardened trim options for erosive process conditions
- Metal-seated construction for high-temperature and severe-service applications
- Soft-seated configurations for tighter shut-off in compatible services
Technical Specifications
|
Parameter |
Specification |
| Valve Type | Angle Control Valve |
| Valve Design | Angle-pattern globe control valve |
| Flow Path | Approximately 90° inlet-to-outlet configuration |
| Nominal Size | DN25 to DN600 |
| Pressure Rating | ASME Class 150, 300, 600, 900, 1500 and 2500 |
| Body Materials | Carbon Steel ASTM A216 WCB/WCC / Low-Temperature Carbon Steel ASTM A352 LCB/LCC / Stainless Steel ASTM A351 CF8/CF8M / Alloy Steel |
| Trim Configuration | Balanced or Unbalanced |
| Flow Characteristic | Equal Percentage / Linear |
| Seat Design | Metal Seat / Soft Seat |
| Trim Options | Standard / Low-Noise / Anti-Cavitation |
| End Connections | Flanged / Butt-Weld / Socket-Weld |
| Actuation | Pneumatic / Electric |
| Flow Control | Throttling / Pressure Reduction |
| Installation | Angle-pattern process piping |
Standards and Testing
Angle control valves are covered by the IEC 60534 series for control-valve terminology, sizing, capacity, dimensions, performance and testing. IEC 60534-2-1 provides methods for determining flow capacity, while IEC 60534-4 covers inspection and routine testing of control valves.
ASME B16.34 specifies requirements for applicable metallic valve pressure-temperature ratings, materials, dimensions, testing and marking. Flanged end dimensions can conform to ASME B16.5, while applicable face-to-face dimensions are covered by ASME B16.10.
Industries Served in Canada
|
|
