Email us: sales@valvesonlycanada.com
Waterworks valves must maintain reliable flow control through pressure changes, frequent operation and long service periods. Valve selection requires attention to pressure ratings, seating design, corrosion protection, end connections and the requirements of the applicable waterworks standard.
For municipal utilities and engineering projects, selecting an AWWA Valve Manufacturer in Canada means matching the valve design to the relevant American Water Works Association (AWWA) standard. Valves Only Canada supplies valve solutions for water distribution, treatment facilities and utility pipeline applications, subject to its available product range.
Types of AWWA Valves
| AWWA Air Release Valve | AWWA Butterfly Valve |
| AWWA Gate Valve | AWWA Swing Check Valve |
| Double Eccentric Butterfly Valve |
AWWA Valve Features
- Rubber-seated designs for applicable butterfly, gate and check valve configurations.
- Valve construction selected according to the relevant AWWA standard.
- Flanged or mechanical-joint connections on applicable waterworks models.
- Manual or geared operation, depending on valve type and size.
- Protective coatings and linings according to product construction.
- Pressure and leakage testing in accordance with the applicable product requirements.
AWWA Valve Specifications
| Specification | Technical Details |
| Butterfly Valve Size | AWWA C504 covers 3–72 in. (DN 75–1800) |
| Large-Diameter Butterfly Valves | AWWA C516 applies to 78 in. (DN 2000) and larger |
| Swing Check Valve Size | AWWA C508-25 covers 2–48 in. (DN 50–1200) |
| Air Valve Size | Under AWWA C512-25: air-release valves ½–6 in.; air/vacuum and combination air valves ½–20 in. |
| Butterfly Valve Pressure | AWWA C504 includes pressure classes up to 250 psig, subject to the specified design and service conditions |
| Air Valve Pressure | AWWA C512-25 specifies a maximum design pressure of 300 psig within its scope |
| Body Materials | ASTM A126 cast iron or ASTM A536 ductile iron |
| Steel Casting Materials | ASTM A216 WCB or ASTM A351 CF8M |
| Seat / Seal Materials | EPDM or other specified resilient materials |
| End Connections | Flanged or mechanical-joint connections |
| Operation | Handwheel, operating nut, gearbox or actuator |
| Protective Coating | AWWA C550 |
| Potable Water Requirements | NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372, where applicable and certified |
Industries Using AWWA Valves
- Municipal water distribution
- Water treatment plants
- Wastewater treatment facilities
- Pumping stations
- Fire-water networks
- Irrigation systems
- Industrial water systems
- Power generation facilities





