Email us: sales@valvesonlycanada.com
Non-Lubricated Plug Valve
Non-Lubricated Plug Valve Manufacturer in Canada offering ASTM A351 CF8M bodies, PTFE sleeves and flanged ends for reliable isolation in chemical processing.
Where routine sealant injection is undesirable, a sleeved non-lubricated plug valve offers an alternative. A low-friction polymer sleeve sits between the plug and body, providing the primary seal as the plug turns. This arrangement avoids introducing plug-sealing lubricant into the process stream.
Valves Only Canada, a Non-Lubricated Plug Valve Manufacturer in Canada, supplies sleeved valves for compatible chemical and industrial fluids. Sleeve material, operating pressure and fluid temperature determine suitability. Abrasive solids require particular attention because they can damage the sleeve and affect sealing.
Features
- No routine injection of plug-sealing lubricant
- Polymer sleeve provides the primary plug-to-body seal
- Quarter-turn operation
- Low-friction contact between plug and sleeve
- Two-way and multiport configurations
- Manual and automated options
- Sleeve and stem-seal maintenance according to service conditions
Technical Specifications
| Parameter | Specification |
| Valve Type | Non-Lubricated Plug Valve |
| Design | Sleeved plug |
| Carbon Steel Body | ASTM A216 WCB |
| Stainless Steel Body | ASTM A351 CF8M / CF3M |
| Plug Material | Compatible stainless steel or specified alloy |
| Sleeve Material | PTFE / Modified PTFE |
| Stem Sealing | PTFE packing or diaphragm sealing arrangement |
| Flow Configuration | Two-way / Three-way, according to model |
| Port Geometry | Rectangular or round port |
| End Connections | Flanged; threaded versions for suitable smaller sizes |
| Flow Function | Isolation / Flow diversion in multiport designs |
| Operation | Lever / Gear / Pneumatic / Electric |
| Installation | Horizontal or vertical |
Standards and Testing
API 599 and ASME B16.34 may apply to the selected industrial valve design. Inspection and pressure testing may follow API 598, with ASME B16.5 for applicable flanged connections and ASME B16.10 for covered dimensions.
Pressure and temperature limits must be established for the complete valve, including the sleeve and stem seals. AWWA C517 relates to qualifying eccentric waterworks valves and should not be presented as the standard for a sleeved process valve.
Industries Served in Canada
- Chemical Processing
- Petrochemical
- Industrial Water Treatment
- Power Generation
- Marine and Offshore
- Industrial Process Systems


