Eccentric Plug Valve

Eccentric Plug Valve Manufacturer in Canada offering PN10–PN25, ASTM A536 ductile iron bodies and flanged connections for isolation in wastewater treatment.

Category:

Wastewater and sludge lines need valves that can close reliably when the fluid contains suspended solids. Eccentric plug valves use an offset plug that moves away from the seat as opening begins. This limits rubbing through most of the operating travel and helps reduce wear on the sealing surface.

Valves Only Canada is an Eccentric Plug Valve Manufacturer in Canada, supplying valves for municipal water, sewage treatment and industrial process water. Resilient plug facings are selected to suit the fluid, while port size and installation orientation are important considerations for solids-handling service.

Features

  • Offset plug movement reduces seating-surface contact
  • Quarter-turn opening and closing
  • Resilient plug facing for dependable isolation
  • Standard-port and full-port configurations
  • No routine injection of plug-sealing lubricant
  • Manual, gear-operated and automated options
  • Suitable configurations for wastewater and sludge handling

Technical Specifications

Parameter Specification
Valve Type Eccentric Plug Valve
Design Non-lubricated, eccentric plug
Nominal Size DN50 to DN1200
Pressure Options PN10, PN16 or PN25
Ductile Iron Body ASTM A536 Grade 65-45-12
Cast Iron Body ASTM A126 Class B
Steel Body Options ASTM A216 WCB / ASTM A351 CF8M
Plug Facing NBR / EPDM, selected for fluid compatibility
Port Configuration Standard port or full port
End Connections Flanged
Flow Direction Preferred pressure direction; reverse-pressure capability according to design
Operation Lever, Gear, Pneumatic or Electric
Installation Shaft and port orientation according to manufacturer instructions

Standards and Testing

AWWA C517 applies to qualifying resilient-seated cast-iron eccentric plug valves for waterworks service. Steel-bodied versions require specifications appropriate to their construction.

Flange drilling, face-to-face dimensions and shell and seat testing should follow the selected valve standard and approved dimensional drawing. For sludge lines, installation instructions should also address solids accumulation around the plug.

Industries Served in Canada

  • Water and Wastewater
  • Municipal Water Supply
  • Sewage Treatment
  • Mining and Process Water
  • Industrial Utilities
  • Irrigation and Agriculture