Direct Acting Pressure Reducing Valve

Valves Only Canada supplies direct acting pressure reducing valves for water systems, featuring PN16 ratings, ductile iron bodies, bronze seats.

Excessive water pressure can put stress on pipelines, increase leakage risks and affect downstream equipment. A Direct Acting Pressure Reducing Valve Manufacturer in Canada, Valves Only Canada provides pressure-regulation solutions for water distribution, irrigation and industrial water systems.

A direct acting pressure reducing valve uses downstream pressure against an adjustable spring-loaded mechanism to control the valve opening. When downstream demand increases and pressure drops, the valve opens further to allow more flow. As demand decreases and outlet pressure rises, the valve moves towards the closed position to reduce flow. This self-operated mechanism regulates pressure without electricity or a separate pilot circuit.

The piston-operated, flanged configuration described here is intended for water service. Correct selection depends on inlet pressure, required outlet pressure, flow demand and the pressure differential across the valve.

Features

  • Direct-acting pressure regulation without a separate pilot circuit
  • Adjustable downstream pressure through spring adjustment
  • Balanced piston mechanism for pressure regulation
  • Self-operated design requiring no external power
  • Epoxy-coated ductile-iron body
  • Bronze seat with NBR sealing components
  • Flanged connections for water-system piping
  • Pressure-gauge ports for setting and monitoring outlet pressure

Technical Specifications

Parameter Specification
Valve Type Direct Acting Pressure Reducing Valve
Design Spring-loaded
Nominal Sizes DN50, DN65, DN80, DN100, DN125 and DN150; DN200 on request
Nominal Pressure Rating PN16
Standard Outlet Adjustment Range 1.5–6 bar
Alternative Outlet Adjustment Range 2–8 bar with the corresponding spring configuration
Maximum Water Temperature 40°C
Body and Cover Material Ductile Iron EN-GJS-400-15
Body Protection Epoxy coating
Seat Material Bronze
Seal Material NBR
End Connections Flanged to EN 1092-2
Flow Direction Unidirectional, following the body flow arrow
Operation Automatic, direct acting
Service Medium Water

Standards and Testing

Flanged connections are designed to the applicable requirements of EN 1092-2. Valve pressure testing can follow EN 12266 where specified for the product. Functional testing should assess pressure adjustment, regulation and closing performance.

For potable-water installations, wetted materials, protective coatings and applicable drinking-water approvals must be suitable for the intended service.

An upstream strainer helps prevent debris from affecting the piston and seat. Where a large pressure reduction is required, the operating conditions should be assessed for cavitation and excessive noise.

Industries Served in Canada

  • Municipal water supply
  • Water treatment and distribution
  • Irrigation and agriculture
  • Industrial manufacturing
  • Mining water utilities
  • Process-water systems